ZZ502 Deluxe ENGINE assembled America's favorite big-block crate engine is now available fully assembled. All the same great parts used in the ZZ502 kit engines, but fully assembled for easier installation in your hot rod, street ...
12353919 Chevy 60-Degree V6 Camshaft Kit All models car and truck Chevrolet V6/60º (2.8L & 3.1L) for off highway use. Smooth idle, daily usage, off road, towing, economy, mild turbo-charged 8.0 - 9.5 to compression ratio, 2200 - 2600 cruising RPM. Basic RPM range 1500 - 4000, 6500 RPM attainable with proper valve springs and lifters. This camshaft kit is designed and manufactured by Crane Camshaft Co.r for GM Service Parts Division. The kit includes (1) camshaft and (12) tappets. The duration at .050 lift (intake/exhaust) is 204º/214º, while the value lift is .420"/.442". Lobe centerline is 112.
12453171 Chevy 60-Degree V6 Camshaft Bearing This small-block V8 cam bearing provides a wider bearing surface than standard V6/60º bearings. This bearing should be installed in the front and rear bearing housings. Technical Notes: Check bearing position in block after installation. Oil hole should be located between 4 o'clock and 5 o'clock position when viewed from front of block.
24508393 Chevy 60-Degree V6 Intake Manifold Lower This high flow intake manifold is used on late Gen III design model V6/60º engines. This manifold matches to port locations of the Gen III head with revised fuel injection locations for improved targeting on the intake valve. Technical Notes: Must be used with new cylinder head P/N 10218167 and upper manifold P/N 24508396.
Buy Now 
Add to Wish List
